Talk:BME 153/Spring 2009/Final

Jump to: navigation, search

In Class, you had mentioned that there would not be bandpass op-amp filters, but under op-amps here, you state that we need to know how to "Design 1st and 2nd order filters based on filter parameters such as passband gain, half-power or quarter-power frequencies, natural frequency, linear center frequency, or bandwidth. " under op-amps. Don't these involve bandpass filters? —Preceding unsigned comment added by Ibl (talk • contribs)
- So, specifically, I will not require that you design a cascaded active bandpass - the way the book did with an active lowpass followed by an active highpass - because the math is wrong there. However, you can buffer the input to a series LRC and buffer the output from the resistor to make a perfectly acceptable active band-pass with a non-unity gain. Also, be able to build a 2nd order lowpass or highpass with a "double corner" that yields a 40dB per decade dropoff outside of the passband. DukeEgr93 22:21, 23 April 2009 (EDT)